Diesel 101 

Air

 

 

A diesel is an air pump — the more clean, cool air you move through it, the more power it can make and the cooler it runs doing it. This is where we break down everything AIR: intake systems, filters, intercoolers, manifolds, and throttle bodies — what they do, what matters, and what's worth upgrading.

Inside Air

Every upgrade starts with airflow

Open a topic to see how we think about it — what each part does, what to look for, and where an upgrade actually pays off on a Cummins, Duramax, or Power Stroke.

 

The first mod most diesel owners make — and for good reason. A cold air intake replaces the restrictive factory airbox and corrugated tubing with a smooth mandrel-bent tube and a high-flow filter. The goal is simple: move more air, with less restriction, at a lower temperature. On a stock truck the gains are mostly throttle response and turbo sound; on a tuned or built truck, the factory intake becomes a genuine bottleneck. Look for a sealed airbox design that pulls cool air from outside the engine bay — an open filter sucking hot underhood air works against you. Fitment is engine-specific, so match the kit to your exact year and platform.

Shop Intake Systems 

Flow vs. filtration — the tradeoff that actually matters. Your filter's job is stopping dirt, not making power. Oiled cotton filters flow well and are washable and reusable, but they need correct cleaning and re-oiling — over-oiling can foul sensors downstream. Dry synthetic filters flow slightly less but need no oil and are effectively maintenance-free: clean or replace and go. Whichever you run, a clogged filter costs you power and fuel economy, and a neglected oiled filter can let fine dust through — dust that ends up in your turbo and cylinders. Check it at every oil change, more often if you run gravel or dusty roads.

Shop Intake & Filters 

Cool air is dense air — and dense air makes power. Your turbo compresses intake air, and compression makes it hot. The intercooler is a radiator for that charge air, sitting between the turbo and the engine to pull the heat back out. Cooler charge air means more oxygen per cubic inch, lower exhaust gas temps, and safer power. Factory intercoolers are sized for factory boost — once you add a tune or a bigger turbo, heat soak sets in and power falls off on long pulls. An upgraded intercooler with a larger core and better end tanks keeps intake temps stable pull after pull, and heavy-duty boots and clamps keep the added boost pressure from blowing the plumbing apart.

Shop Intercoolers 

The last stop before the cylinder. The intake manifold splits the charge air from your intercooler and distributes it to each cylinder. Factory manifolds are cast for cost and packaging, not flow — sharp bends, rough casting, and uneven runner lengths mean some cylinders get more air than others. An aftermarket manifold with smooth, evenly sized runners balances airflow across all cylinders, which improves throttle response and helps the engine make even power across the RPM range. This is typically a supporting upgrade: on a mild build the factory manifold is fine, but once you're moving serious air with a bigger turbo, the manifold becomes the next restriction in line.

Ask About Fitment 

Wait — diesels have throttle bodies? Classic diesels don't use a throttle plate at all: power is controlled by fuel, not air, which is why a diesel idles with wide-open airflow. But most modern diesels (6.7L Cummins, L5P Duramax, 6.7L Power Stroke) do have an intake throttle valve — the ECU uses it to drive EGR flow and to smooth shutdown. That valve is sized for stock airflow and can become a restriction on a modified truck. Upgraded throttle valves and intake horns open up that bottleneck with a larger bore and smoother path into the manifold. It's a supporting mod, not a first mod — but on a built truck chasing every bit of airflow, it's part of the system.

Ask About Options 

Shop The Category 

Our Picks For Air

 

 

The intakes, filters, and charge-air parts we'd put on our own trucks — matched to your year, make, and model. Don't see your setup? Call the shop and we'll track it down.

Title

Intakes

Products
View product
Pre-Filter for 20-24 Ford 6.7L Ram-Air Intake System Banks Power
Price
$44.08
View product
Ram-Air Intake for 19-24 Ram 2500/3500 6.7L Cummins Dry Filter Banks Power
Price
$469.00
View product
Ram-Air Cold-Air Intake System Dry Filter for 20-22 Ford F250/F350/F450 6.7L Power Stroke Banks Power
Price
$469.00
Title

Filters

Products
View product
Air Filter Element Ram Air System 17-19 GM 6.6L L5P Banks Power
Price
$102.00
View product
ATS High Flow Air Filter Cone Style
Price
$74.99
View product
Pre-Filter Filter Wrap For Use W/Ram-Air Cold-Air Intake Systems Air Filter Banks Power
Price
$44.08

Keep learning about diesel Choose a new category

Done here? Jump straight into the next topic.

 

Drop Us A Line

 
⚑

Find Us

1420 South Henderson Street
Seattle, WA 98108

☉

Watch Us

Follow along for builds, shop life, and diesel content.

Hours Mon–Fri: 10:00 AM – 6:30 PM Sat–Sun: Closed