Synergy

Synergy 2013+ Dodge Ram 2500 / 3500 Steering Kit


$1,000.00

  • PART #: 8725-01

Ram Steering Kit. All-new design and components specific to the new radius arm Ram Truck platform. Direct bolt-in replacement for the stock drag link and tie rod for an immediate upgrade in steering feel and strength. No wheel size requirements! It can be installed on a stock Ram with stock wheels and tires. Tie rod is made from heat-treated Chromoly for maximum strength. Low misalignment dust boots eliminate tie rod flop. Drag link is made from high-quality DOM steel tubing for maximum strength. You will not find a better steering kit on the market!

Online ordering will be available soon. Please call us at (206) 466-5274 or email us your order to .


  • Drag Link bolts right into the factory mounts with no additional wheel requirements.
  • Tie Rod is over 40% stronger than the stock tie rod.
  • No factory drag link components need to be reused.
  • Includes Synergy HD Metal on Metal Tie Rod Ends with oversized 1-inch shank.
  • Low Misalignment tie rod end boots are used to prevent unwanted tie rod flop.
  • Eliminates the steering dead spot commonly associated with hydro assist setups.
  • Single Plane tie rod end used on the pitman arm side to prevent unwanted drag link flop.
  • Tie Rod is CNC formed from 1.75-inch x .188 wall seamless Chromoly tubing and heat-treated after forming.
  • Tie Rod has an outer diameter (OD) of 1.75 inches and must be used with our steering stabilizer clamp.
  • Drag Link is CNC formed from 1.50-inch x .250 wall DOM tubing.
  • Steering Stabilizer Bracket CNC Formed from 3/16 inch steel.
  • Steering Stabilizer Bracket Mounting bolt has been rotated 90 degrees to eliminate any binding.
  • Steering Stabilizer Bracket Allows fitment of steering stabilizers that use a 1/2 inch mounting bolt.
  • Steering Stabilizer Bracket Designed to fit 1 3/4 inch diameter tie rods.
  • Abrasion-resistant powder coat finishes for maximum durability and corrosion resistance.
  • Synergy Double Adjuster Sleeve allows adjustment of drag link length without removing it from the vehicle.
  • Both ends of the bar use pinch bolts instead of jam nuts to simplify installation and adjustment.
  • 100% bolt-on components assure an easy, trouble-free installation with the use of basic hand tools.
Brand Synergy
Shipping Weight 42 lb.
Shipping Width 12 in.
Shipping Length 65 in.
Shipping Height 9 in.
Prop 65 WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov
Year Make Model Engine
2013 Cummins 3500 Cummins 6.7L
2014 Cummins 2500 Cummins 6.7L
2014 Cummins 3500 Cummins 6.7L
2015 Cummins 2500 Cummins 6.7L
2015 Cummins 3500 Cummins 6.7L
2016 Cummins 2500 Cummins 6.7L
2016 Cummins 3500 Cummins 6.7L
2017 Cummins 2500 Cummins 6.7L
2017 Cummins 3500 Cummins 6.7L
Year Make Model Engine
2018 Cummins 2500 Cummins 6.7L
2018 Cummins 3500 Cummins 6.7L
2019 Cummins 2500 Cummins 6.7L
2019 Cummins 3500 Cummins 6.7L
2020 Cummins 2500 Cummins 6.7L
2020 Cummins 3500 Cummins 6.7L
2021 Cummins 2500 Cummins 6.7L
2021 Cummins 3500 Cummins 6.7L

Diesel Dudes LLC is fueled by solid communication and proven performance in building diesel engines and trucks - honestly and expertly in Seattle.

Contact

SEATTLE

1420 S Henderson St
Seattle, WA 98108

Directions

CONNECT

(206) 466-5274
Mon-Fri: 10am-6:30pm
Sat-Sun: Closed