178/208 Camshaft Kit for 1998.5-2018 Dodge Ram 5.9L/6.7L Cummins 24V - Hamilton Cams
Thumbnail
Thumbnail
Thumbnail
178/208 Camshaft Kit for 1998.5-2018 Dodge Ram 5.9L/6.7L Cummins 24V - Hamilton Cams
SKU
07-cc-24V178-GHJR
List price
$1,299.00
Price
$1,299.00

    This kit upgrades every part of the 24 valve valvetrain . When you combine our best all-around performing camshaft, with valve springs that control the valvetrain to 4500rpm and 80lbs of boost, pushrods that are rated to well over 3,000hp and our 1.45 Inch tappets that provide more surface area, you have the best cam combo on the market for the 1998.5-2018 dodge Cummins. If you're looking for the quickest spool and the widest rpm band of all of our cams, this is it.

    Initially designed for trucks that work hard and need instant torque in the low rpm range. It was later found to greatly help spool large single turbos, increase fuel economy, lower EGT, maintain power at higher elevations, all while keeping big hp and rpm potential. It is also 49 state EPA compliant.

    If you are thinking it is too small for your hp goals, think again. On our engine dyno, a 6.7l with a single s400 it made 1100hp with a stock head, 1250 on a stock head with larger valves, and 1588hp at 4500 RPM with a ported head.

    What's Included:

    • 178/208 Camshaft (fits 89-2018 Cummins)
    • Heavy duty pushrods (OEM power to over 3000 hp)
    • 103 Valve Springs
    • Tappets

    Details:

    • Sold As: Kit
    • Universal: No
    • Vehicle Type: Truck
    • Liter: 5.9L, 6.7L
    • Fuel Type: Diesel
    • Valve: 24-Valve
    • Duration at .050 Inch: 178 Degree Intake / 208 Degree Exhaust
    • RPM Range: Up to 4,500 RPM
    • Valve Lash: .010 Inch Intake / .020 Inch Exhaust
    • Seat Pressure: 103 lb
    • Emissions Compliance: 49-State EPA Compliant - Not for Sale in California

    Fitment Notes:

    • Fitment: 1998.5-2007 Dodge Ram 5.9L Cummins 24-Valve and 2007.5-2018 Ram 6.7L Cummins flat-tappet engines.
    • For it to be drop in you will need no more than .020 Inch piston protrusion and at least .038 Inch valve face depth with a standard gasket. If you do not meet the minimum requirements for piston to valve clearance, don't worry, you can still run an oversize head gasket or cut valve reliefs.
    • Not for sale in the state of CA

    Installation Notes:

    • To make sure that you have no issues during break-in, follow these few suggestions.
    • Disconnect the fuel system and spin the engine with the starter until oil pressure can be read or until oil is coming out of the rocker arms on cylinder#6
    • Do not let the starter run for more than 10 seconds at a time
    • Once oil pressure has been verified, let the engine start and run until operating temperature is achieved, then shut engine down
    • A hot-retorque is very important and will change the valve lash setting, so it is important to set lash last.
    • Adjust valves (.010 Inch intake/.020 Inch exhaust) then you are cleared to abuse your engine. Enjoy the added airflow
    • 2-3 times a year I get calls from customers that have lash starting to get loose on the last 3 cylinders. This is caused from poor lubrication at the time of initial start-up. In this case the cam literally eats its way through the block away from the force of the tappets. Assembly lube and oil pressure on start-up are a pretty big deal to your cam. Don't let this happen to you.
    • Approved oil - required. Use a 15W-40 (or 5W-40 in sub-zero conditions) with adequate zinc, phosphorus, and molybdenum. Thin or low-additive oils don't provide the shear strength a flat tappet needs.

    Approved Oils:

    • Valvoline Full Synthetic 15W-40
    • Valvoline Synthetic Blend 15W-40
    • Valvoline All-Terrain 15W-40
    • Schaeffer's 15W-40
    • Mobil Delvac Extreme 15W-40
    • Liqui Moly Touring High Tech 15W-40
    • Driven Racing Oil 15W-40
    • Shell Rotella T6 Full Synthetic 15W-40
    • Shell Rotella 15W-40
    CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
    Vehicle Fitment
    1998-2002 Dodge Ram 3500
    1998-2002 Dodge Ram 2500
    2004-2010 Dodge Ram 2500 SLT
    2004-2010 Dodge Ram 3500 ST
    2004-2010 Dodge Ram 2500 ST
    2004-2010 Dodge Ram 3500 Laramie
    2004-2010 Dodge Ram 3500 SLT
    2005-2010 Dodge Ram 2500 Laramie
    2006-2007 Dodge Ram 3500 Sport
    2006 Dodge Ram 2500 Sport
    2006 Dodge Ram 2500 TRX4
    2008-2009 Dodge Ram 3500 SXT
    2008-2010 Dodge Ram 2500 SXT
    2010 Dodge Ram 2500 TRX
    2011-2018 Ram 3500 SLT
    2011-2013 Ram 3500 ST
    2011-2013 Ram 2500 ST
    2011-2018 Ram 2500 SLT
    2011-2018 Ram 2500 Laramie
    2011-2018 Ram 2500 Laramie Longhorn
    2011-2018 Ram 3500 Laramie Longhorn
    2011-2018 Ram 3500 Laramie
    2012-2016 Ram 2500 Outdoorsman
    2013-2018 Ram 3500 Big Horn
    2013-2018 Ram 2500 Big Horn
    2013-2015 Ram 3500 Lone Star
    2013-2018 Ram 2500 Tradesman
    2013-2018 Ram 3500 Tradesman
    2013-2015 Ram 2500 Lone Star
    2014-2015 Ram 2500 Laramie Limited
    2014-2015 Ram 3500 Laramie Limited
    2016-2018 Ram 3500 Limited
    2016-2018 Ram 2500 Limited
    2017 Ram 3500 Lone Star
    Liter
    5.9 Liter
    6.7 Liter
    Mfg Part No
    07-cc-24V178
    Universal Fitment
    Off
    Brand
    Hamilton Cams
    Category
    Engine and Components
    Engine
    Engine Camshaft
    Specs
    Country of Origin: USA
    Sold As: Kit
    UPC: 857340008308
    Availability: Available
    Universal: No
    Emissions: 49-State EPA Compliant - Not for Sale in California
    Valve Type: 24-Valve
    Fuel Type
    Diesel
    Vehicle Type
    Truck/SUV
    Core Charge
    $0.00
    Engine Manufacturer
    Cummins